उत्पादों का विवरण

घर > उत्पादों >

सीएनसी यांत्रिक भाग

CNC Bent Al 5052-H32 Ventilation Panel with Perforated Louver Patterns and Precision Flanges for Electronics Enclosures

सभी श्रेणियाँ

सीएनसी विनिर्माण समाधान

हमसे संपर्क करें

Mrs. Yang

kristen.yang@jinbo-china.com

+86 13798898651

Y13798898651

अब संपर्क करें

CNC Bent Al 5052-H32 Ventilation Panel with Perforated Louver Patterns and Precision Flanges for Electronics Enclosures

विस्तृत जानकारी

उत्पाद का वर्णन

विस्तृत जानकारी

सामग्री:

अल 5052-एच32

शीट की मोटाई:

0.8मिमी - 3.0मिमी

सहनशीलता:

+/-0.3मिमी (मोड़ कोण), +/-0.5मिमी (समग्र आयाम)

अधिकतम पैनल आकार:

1200मिमी x 800मिमी

खुला क्षेत्र अनुपात:

20% - 60%

सतही समापन:

मिल खत्म, anodized, पाउडर लेपित

उत्पाद का वर्णन

CNC Bent Aluminum Ventilation Panel for Electronics Enclosures and Industrial Equipment

Product Overview

Ventilation panels may appear simple, but their design requires careful engineering. The hole pattern directly impacts airflow, noise levels, and electromagnetic compatibility (EMC) shielding effectiveness. Too many holes provide excellent airflow but compromise EMI protection, while too few holes can lead to equipment overheating. Achieving the right balance is crucial.

We manufacture ventilation panels from Al 5052-H32 sheet using CNC press brakes. This aluminum alloy offers superior bendability without cracking, excellent corrosion resistance for industrial environments, and optimal strength-to-weight ratio. The H32 temper provides sufficient stiffness while maintaining formability.

Our process begins with cutting ventilation patterns using CNC turret punch presses for perforated holes or CNC laser cutting for custom and louver patterns. After bending, panels typically receive powder coating or anodized finishes. For electronics enclosures, black anodized panels enhance thermal radiation, while outdoor applications benefit from weather-resistant finishes.

Flange design is critical for proper sealing. Our precision bending ensures flat flanges that maintain gasket integrity, preserving both IP ratings and EMC shielding performance.

Key Features

Al 5052-H32 Construction: Superior bendability compared to 6061 (no cracking at tight radii), better corrosion resistance than 3003, and excellent strength-to-weight ratio
CNC Perforated and Louver Patterns: Turret punch for standard perforations; CNC laser for custom patterns and louvers. Open area ratio optimized for airflow, EMC shielding, and structural integrity
Precision Bent Flanges: CNC press brake with ±0.3mm bend angle accuracy. Flange flatness within 0.5mm over 500mm length for reliable gasket sealing
EMC-Designed Louvers: Angled louver patterns providing 20-40dB EMI attenuation while maintaining airflow
Finish Options: Mill finish, anodized (clear/black/color), or powder coated (RAL colors). All compatible with Al 5052

Technical Specifications

Specification	Details
Product Name	CNC Bent Aluminum Ventilation Panel
Material Options	Al 5052-H32 (standard), Al 6061-T6 (structural), Al 3003-H14 (economy)
Sheet Thickness	0.8mm - 3.0mm
Tolerance	±0.3mm (bend angles), ±0.5mm (overall dimensions), ±0.1mm (hole positions)
Max Panel Size	1200mm × 800mm
Ventilation Patterns	Perforated (round/square/slot), Louver (angled), Custom (laser cut)
Open Area Ratio	20% - 60% (design dependent)
Surface Finish	Mill finish, Anodized (clear/black/color), Powder coated (RAL colors)
Certifications	ISO 9001:2015, RoHS, CE
Lead Time - Prototype	5-7 days
Lead Time - Production	7-12 days
MOQ	10 pieces (prototype), 100+ (production)
Origin	Dongguan, China

Applications

Electronics Enclosures: Ventilation panels for rack-mounted equipment, server enclosures, and industrial control cabinets with EMC shielding
Power Electronics: Vent panels for VFD enclosures, UPS cabinets, and power supply housings with enhanced thermal management
Industrial Control Panels: Ventilation for PLC cabinets, motor control centers, and automation enclosures with IP54 rating options
Telecom Equipment: Outdoor-rated vent panels for base station enclosures and network equipment cabinets
Medical Equipment Enclosures: Easy-clean ventilation panels for diagnostic equipment and imaging systems
Audio/Video Equipment: Decorative ventilation panels with custom patterns for aesthetic applications

Why Choose Sinbo Precision

Airflow and EMC Design Support: Comprehensive engineering support for calculating open area ratios and optimizing ventilation patterns
Turret Punch + Laser Flexibility: Optimal process selection based on volume and design requirements
Flange Flatness: Rigorous quality control to prevent warping and ensure proper gasket sealing
Finish Coordination: Managed finishing services through certified partners with EMC compatibility
Custom Patterns: Support for custom designs in DXF or DWG formats with engineering consultation
Fast Prototypes: 3-5 day turnaround for laser-cut and hand-bent prototype panels

Manufacturing Process

Design Review: Comprehensive assessment of panel dimensions, flange design, ventilation pattern, and performance requirements
Flat Pattern Development: Bend allowance calculation and DXF generation for CNC programming
Cutting & Perforation: Turret punch or CNC laser cutting with deburred edges
CNC Bending: Precision press brake bending with optimized tooling and sequence
Finishing: Anodizing or powder coating with quality inspection
Inspection: Dimensional verification, flatness checking, and optional airflow testing

Frequently Asked Questions

Perforated holes or louvers for my enclosure?

Perforated holes are suitable for simple ventilation where EMC isn't a concern. Louvers provide both airflow and EMC shielding by blocking electromagnetic radiation while allowing air passage. Louvers also offer better rain protection for outdoor applications.

What open area ratio do I need?

For natural convection cooling, 30-40% open area is typical. For forced-air cooling, 20-30% is usually sufficient. We calculate the optimal ratio based on your CFM requirements and fan pressure curves, balancing airflow against EMC shielding and structural integrity.

Al 5052 or Al 6061 for the panel?

Al 5052 is recommended for bent panels due to superior bendability without cracking. Al 6061-T6 offers greater strength but may crack at tight bend radii. For flat panels requiring maximum stiffness, 6061 is acceptable.

Can you make the panel IP65 rated?

We design panel features (gasket grooves, flange flatness, mounting holes) to support IP65 requirements. However, IP65 certification requires testing of the complete enclosure assembly, including the panel, gasket, mounting hardware, and frame.

What's the thinnest aluminum you can bend for a vent panel?

0.5mm Al 5052 for small panels (under 300mm), 0.8mm for panels up to 500mm. We recommend 1.0mm minimum for structural ventilation panels to maintain flatness and gasket seal integrity.

Do you provide the air filters?

Yes, we can source and install air filters (mesh, foam, or pleated) as sub-assemblies. Common filter types include G3/G4 (coarse dust), M5/M6 (fine dust), and activated carbon (odor/VOC removal).

टैग:

Sinbo Precision Mechanical Co., Ltd.

सीएनसी यांत्रिक भाग

सीएनसी मोड़ भागों

सीएनसी मिलिंग पार्ट्स

सीएनसी मशीनिंग सेवाएं

शीत फोर्जिंग भागों

सीएनसी टर्निंग मिलिंग पार्ट्स

सीएनसी एल्यूमीनियम भागों

सीएनसी स्टेनलेस स्टील भागों

सीएनसी पीतल के पुर्जे

सीएनसी मुद्रांकन भागों

प्लास्टिक भागों का मशीनिंग

झुकने वाली शीट धातु के पुर्जे

नई ऊर्जा ऑटो पार्ट्स

ऊर्जा भंडारण कनेक्टर्स

संपर्ककर्ता टर्मिनल

बैटरी टर्मिनल कनेक्टर

सीएनसी विनिर्माण समाधान

सीएनसी यांत्रिक भाग

सीएनसी मोड़ भागों

सीएनसी मिलिंग पार्ट्स

सीएनसी मशीनिंग सेवाएं

शीत फोर्जिंग भागों

सीएनसी टर्निंग मिलिंग पार्ट्स

सीएनसी एल्यूमीनियम भागों

सीएनसी स्टेनलेस स्टील भागों

सीएनसी पीतल के पुर्जे

सीएनसी मुद्रांकन भागों

प्लास्टिक भागों का मशीनिंग

झुकने वाली शीट धातु के पुर्जे

नई ऊर्जा ऑटो पार्ट्स

ऊर्जा भंडारण कनेक्टर्स

संपर्ककर्ता टर्मिनल

बैटरी टर्मिनल कनेक्टर

सीएनसी विनिर्माण समाधान

उत्पादों का विवरण

सीएनसी यांत्रिक भाग

सीएनसी मोड़ भागों

सीएनसी मिलिंग पार्ट्स

सीएनसी मशीनिंग सेवाएं

शीत फोर्जिंग भागों

सीएनसी टर्निंग मिलिंग पार्ट्स

सीएनसी एल्यूमीनियम भागों

सीएनसी स्टेनलेस स्टील भागों

सीएनसी पीतल के पुर्जे

सीएनसी मुद्रांकन भागों

प्लास्टिक भागों का मशीनिंग

झुकने वाली शीट धातु के पुर्जे

नई ऊर्जा ऑटो पार्ट्स

ऊर्जा भंडारण कनेक्टर्स

संपर्ककर्ता टर्मिनल

बैटरी टर्मिनल कनेक्टर

सीएनसी विनिर्माण समाधान

CNC Bent Al 5052-H32 Ventilation Panel with Perforated Louver Patterns and Precision Flanges for Electronics Enclosures